Latest pollution control unit Tenders | Government pollution control unit Tenders

corporations/Associations/Others

CTN :40096101

01 May, 2025 1.29 Lacs

Ahmedabad - Gujarat

Tender For rate contract for s.i.t.c. work of (1) 40/80,150/150litre/hr cooling capacity andlitre storage capacity type isi marked water cooler and (2) 180/200litre/hr.capacity type water purifier with water level sensor with buy-backscheme at west zone various premises of amcup to limit of rs. 10.00 lakh.

CTN :40085821

29 Apr, 2025 7.14 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/03 - name of road - nh-82 soyba to masiya road , length- 8.20km .clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pices not exceeding 0.02 cumin volume and stock pilling at designated location and disposal of dismantled materials upto a lead of 1000 m,stacking serviceable and unserviceable materials separately., scarifying the existing bituminous road surface and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per technical specification clause 301.5, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. grading - ii, wbm grading - iii - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wh

CTN :40085825

29 Apr, 2025 14.83 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/04 - name of road - construction of road from nh-31 to rahui bazar (incl. 5 years maint.)clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pices not exceeding 0.02 cumin volume and stock pilling at designated location and disposal of dismantled materials upto a lead of 1000 m,stacking serviceable and unserviceable materials separately., construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per technical specification clause 301.5, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. grading - ii, wbm grading - iii - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished i

CTN :40085826

29 Apr, 2025 11.00 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/05 - name of road - repair of road from sarmera issua to brindavan road (incl. 5 years maint.), length of road - 2600 mclearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pices not exceeding 0.02 cumin volume and stock pilling at designated location and disposal of dismantled materials upto a lead of 1000 m,stacking serviceable and unserviceable materials separately., scarifying the existing bituminous road surface and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per technical specification clause 301.5, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. grading - ii, wbm grading - iii - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size o

Central Government/Public Sector

CTN :40081957

29 Apr, 2025 NA

Dehradun - Uttarakhand

Tender For supply of spare parts of hydrogen generator - spare parts of hydrogen generator, ro system, pu pipe 1/4 for h2 generator, ro system, pu pipe 3/8 for h2 generator, ro system, pu pipe 1/2" for h2 generator, ro system t, elbow, union, reducer for h2 generator, ro system t, elbow, union, reducer 3/8 for h2 generator, ro system t, elbow, union, reducer1/2 for h2 generator, booster pump(24 v,dc,300 rpm) for elga centra r120 di unit, booster pump(24 v,dc,500 rpm) for elga centra r120 di unit, inlet solenoid valve 24v dc for elga centra r120 di unit, ro cartridge 1 x 20 for elga centra r120 di unit, ro membrane, 2 x12 for elga centra r120 di unit, elga vent filter-lc136 for elga centra r120 di unit, di water float switch for elga centra r120 di unit, level sensor a-200 tank, 58-1100-0059(ls201) for h2 generator, resistivity sensor, 58-1100-0039(rs209) for h2 generator, combustible gas sensor 58-1100-0040(cg220) for h2 generator, annual maintenance kit, (grundfos) c series 2, kt-0100-0058 for h2 generator, 1 rubber gasket for h2 generator, h2 booster oil filter for gas compressor, rotary vane pump w/moter assy, 115/230 volts, 50/60 hz, 54-0500-0142 for h2 generator

CTN :40062013

03 May, 2025 2.53 Crore

Karanjia - Odisha

Tender For procurement and installation of different instruments for instrumentation of earth dam and spillway in deo irrigation project for the year 2025. - supply of fiberglass reinforced plastic (frp) make universal enterprises an improved venturi plate conformed to is: 9108 for accurate measurement of water flowing through channels comprising of masonry construction provided with pre-fabricated glass fiber lining on both sides, a side chamber provided in one side masonry wall of the said flume on the upstream side, a pipe provided at the bottom of the chamber connecting the said chamber with the water flowing through the notch, a float means provided in the said chamber, enabling recording the rising or falling level of water in the said chamber such as a scale provided in the said chamber, moulded engraved gauge marking in lit/sec and also in centimeter including moulded and engraved discharge table, capacity marking, flow direction, m.s pipe stiffeners, hold fasts, sand treatment on the backside of plate but excluding gst as per the instruction of engineer-in-charge etc. complete, inside spillway foundation gallery - 15 lit./sec. v-notch, seepage drain - 90 lit./sec. v-notch, calibration marks:- supply of polymers composites improved calibration marks make universal enterprises with contact molding process, both side finish, m.s. strip embedded inside, engraved and molded marking for bands and figures covered with radium and covered with two coats of polyurethane for surface protection with marking in reduced levels, sill, fsl, frl, mwl but excluding gst as per the instruction of engineer-in-charge etc. complete, supply vw up-lift pressure meter provision for connected to das make : aimil ltd. uplift pressure meters are used for measuring and recording of uplift pressures acting in foundations of concrete/masonry dams. vibrating wire type uplift pressure meter : range: 0.2 mpa to 5.0 mpa./7ksc accuracy: 0.5 -1 % fs. temp limit: - 10 to 70 deg c. coil resistance: 140 - 160 ohm thermistor: ysi-44005 or equivalent. material: stainless steel cable: 1m, 4-core borehole for uplift pressure meter at foundation gallery (inside spillway) should be straight from foundation level and clear. proposed location : inside spillway foundation gallery in overflow section: 7 no. non overflow section: 2 no. purpose: uplift water pressure measurement. (but excluding gst), supply automatic seepage measuring system make : aimil ltd / sysgeo italy or equivalent vibrating wire water leakage measuring systems are used for measuring water leakage and flow in dam galleries by installing v notch weir coupled with vibrating wire sensor for remote monitoring of water leakage. sensor type: sensor : vibrating wire precision water level sensor range: 300mm resolution: 0.025%fs material : stainless steel excitation : sweep or pluck assembly: v.w. type sensors enclosed in an environmental proof fibre glass box. splicing kit & adhesive required accessories. proposed location : inside spillway foundation gallery: 1 no. toe drain: 1 no. (drainage outlet) purpose: seepage water measurement in liter per second (but excluding gst), supply data logger or data acquisition system aimil make dt85g with cem20 or ace s korea analog channels 16 analog input channels each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. expansion requires optional cem20 sampling integrates over 50/60hz line period for accuracy and noise rejection maximum sample speed: 40hz effective resolution: 18 bits linearity: 0.01% common mode rejection: >90db line series mode rejection: >35db vibrating wire frequency range: 500 to 5khz coil resistance: 50 to 200 stimulation method: single pulse pluc digital channels 8 bi-directional channels input type: 8 logic level (max 20/30v) output type: 4 with open drain fet(max: 30v, 100ma) 4 with logic output alarms power supply , sim card will be in your scope. propo

corporations/Associations/Others

CTN :38195252

28 Apr, 2025 4.68 Crore

Bengaluru - Karnataka

Tender For corrigendum : procurement of nrc engine spares - input pipe for turbo charger ll bsiii, ll bsiv, sa of dipstick guide ll bsiii, ll bsiv, starter ring ll bsiii, ll bsiv, engine oil cap hino ll bsiii, spacer washer ll bsiii, ll bsiv, "s" cam distance piece ll bsiii, flange coupling ll bsiii, oil cooler plate hino ll bsiii, sa of vehicle speed sensor ll bsiii, stopper plate ll bsiii, ll bsiv, ignition relay ll bsiii , oil cooler four plate hino ll bsiii, bsiv, acclerator cable ll bsiii, vaccum indicator ll bsiii, ll bsiv, fuel head assembly ll bsiii, oil cooler 'o' ring ll bsiii, ll bsiv, valve cap ll bsiii, ll midi bsiii, oil drain pipe ll bsiii, ll bsiv, thermostat ll bsiii, engine speed sensor ll bsiii, water temp sensor ll bsiii, ll bsiv, boost procure temp sensor ll bsiii, isolator noise tt bsiii, tt bsiv, tube dip stick tt bsiii, tube dip stick tt bsiii, tt bsiv, dipstick tt bsiii, tt bsiv, dip stick tt bsiii, tt bsiv, plug expansion tt bsiii, tt bsiv, plug expansion tt bsiii, dipstick tt bsiii, tube oil guage tt bsiii, tube oil guage tt bsiii, flywheel tt bsiii, flywheel tt bsiii, clamp v band tt bsiii, tt bsiv, clamp v band tt bsiii, tt bsiv, thermostat tc tt bsii, pin timing tt bsiii, plug expansion tt bsiii, plug expansion tt bsiii, racker lever assembly tt bsiii, tt bsiv, connecting rod bolt tt bsiii, thermostat 1616 tt bsiv, accl pedal sensor ll midi bsiv, urea tank cap ll midi bsiv, oil cooler plate ll bsiv, connecting-rod bsiv, damper pully tt bsiv, cam shaft tt bsiii, injectior washer hino ll bsiii, ll bsiv, flywheel face plate ll bsiii, ll bsiv, gear fip drive 60 teeth ll bsiii, fan blade assy bsii (4 hole/10 leaf) ll bsiii, ll bsiv, fly wheel bolt hino ll bsiii, themostat mtl ll bsiii, ll bsiv, engine mounting bracket rh ll bsiii, ll bsiv, disel main hose (tank to hand primer) ll bsiv, dip stick guage ll bsiii, ll bsiv, crdi pressure relief valve ll bsiv, cap assembly fuel tank tt bsvi, thermostat eic bsiii , fly wheel gear ring tt bsiii, assembly fly wheel with ring gear tt bsiii, fly wheel asembly eic bsiii, assembly fly wheel and ring gear 694 auto eic bsiv, ring gear fly wheel e694 auto eic bsiv, viscous fan controlling unit eic bsiv, thermostat eic bsiii, engine oil cap eic bsiii, eic bsiv, fly wheel ring eic bsiii, shim speed sensor eiv bsiv, thermostat eic bsiii, eic bsiv, assy idler pulley eic bsiv, viscus fan assembly eic bsiv, oil cooler inner eic bsiii, engine oil cap tt bsiii, cool breather ll bsiii, ll bsiv, clip engine breather eic bsiii, eic bsiv, cooler plate assbly eic bsiv, speed sensor mtg ll bsiii, tharmostat ll bsiii, ll bsiv, ll bsvi, pipe by pass eic bsiii, idler bracket eic bsiv, spacer bearing front eic bsiii, eic bsiv, damper pully ll bsiii, sa of guage dip stick slf ll bsiii, fuel tank cap ll bsiv, thermostat tt midi bsiii, rocker pedestal eic bsiv, flywheel ring (138 teeth) tt bsiii, tata engine oil cap tt bsiii, tt bsiv, thermostat tt bsiii, tt bsiv, thermosta assembly tt bsiv, plug expansion tt bsiii, coller egr unit cooler exhaust gasreci ll bsiv , assy oil cooler eic bsiv, exhaust manifold 6 hole ll bsiv, egr valve and actuator assembly ll bsiv, body oil coller eic bsiii, pendant type elec acc pedal flr mtd ll bsiv, egr pipe in second line ll bsiv, hose engine breather eic bsiv, dip stick assy eic bsiii, assy breather hose eic bsiv, gauge oil level eic bsiv, overhaul kit turbo charger ll bsiii, honey well minor repair kit ll bsiii, proximity sensor ll bsiii bsiv, brake liningade fuse 10amp ll bsiii , minor repair kit eic bsiii, oil cooler element eic bsiv, pressure sensor-common rail ll bsiv tt bsiv, turbo repair kit tt bsiv, fuse 5 amps ll bsiii , fan belt tensioner eic bsiv, speed sensor tt bsiv ll bsiv, oil pressure sensor ll bsiv, engine speed sensor ll bsiv, turbo charger repair kit ll bsiv, oil pressure sensor eic bsiv, dipstick tt bsiii bsiv, fuse 30 amps ll bsiii , secondary repair kit tt bsiii, rocker switch battery cut off 24v eic bsiv, fuse blade type ll bsiii bsiv, fuel

Central Government/Public Sector

CTN :39926291

28 Apr, 2025 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of water level sensor with straight connector , oil level sensor with 90 degree connector

CTN :39858641

25 Apr, 2025 17.34 Lacs

Shimla - Himachal Pradesh

Tender For corrigendum : supply of water level sensor , water velocity sensor , hmi , dual sim , panel enclosure complete with wiring and earthing material , battery backup with solar panel , cables and accessories , installation and commssioning of sensors and systems at site , providing dual sim internet connection for communication modem at site , maintenace of system for collection of sensor data for real time data display

Central Government And Public Sector

CTN :39872863

26 Apr, 2025 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : supply of spares for laundry machine - electronic thermostat w,wire lm353m compatible to machine model- hm270 and hm490, make- ipso , seal assembly grommet for temperature sensor compatible to machine model- hm270, hm490 and hf234, make- ipso , speed detector xs4p12pa340 compatible to machine model- hm270, hm490 and hf234, make- ipso , main print board ps40 230v compatible to machine model- hm270 and hm490, make- ipso , keyboard ps40 220v compatible to machine model- hm270 and hm490, make- ipso , water level switch pressure-1 compatible to machine modelhm270, hm490 and hf234, make- ipso , kit drain valve w,bracket mdb 300 no compatible to machine modelhm270, hm490 and hf234, make- ipso , tilt switch compatible to machine model- hm270 and hm490, makeipso , water inlet valve compatible to machine modelhm270 and hm490, make- ipso , electrical door lock pkg ele-div-0077 compatible to machine model- hm270 and hm490, make- ipso , computer board micro 20,frequency 230v compatible to machine model- hf234, make- ipso , eprom 27c256 pkg compatible to machine model- hf234, make- ipso , glass fuse 5x20mm f0, 5a,250v compatible to machine model- hf234, make- ipso , emergency button xb4-bs542 red with lock compatible to machine modelhf234, make- ipso , contact for emergency stop compatible to machine model- hf234, make- ipso , thermostat cygnus detector lm35 hf,ww304 compatible to machine modelhf234, make- ipso , tilt switch obl compatible to machine model- hf234, make- ipso , two way inlet valve muller30 plus 50l us-thd 220v compatible to machine modelhf234, make- ipso , solenoid inlet valve muller 220v compatible to machine model- hf234, make- ipso , two way inlet valve muller met 30 plus 50l 220v compatible to machine model- hf234, make- ipso , diaphragm for muller valve 30 plus 50 compatible to machine model- hf234, make- ipso , rotation sensor compatible to machine modeldr55, make- ipso , thermistor compatible to machine model- dr55, make- ipso , cabinet high limit thermostat compatible to machine model- dr55, make- ipso , thermostat lim 340f violet compatible to machine modeldr55, make- ipso , thermostat lim 350f blue compatible to machine model- dr55, make- ipso , air flow switch actuator compatible to machine model- dr55, make- ipso , contactor block for ess compatible to machine modeldr55, make- ipso , door switch snap spst no cherry compatible to machine model- dr55, make- ipso , lint door switch compatible to machine model- dr55, make- ipso , electronic control dx4 compatible to machine model- dr55, make- ipso , temperature sensor for electronic control dx4 compatible to machine model- dr55, make- ipso , drain pipe qui -nca - 0380 for ipso hm490 washing machine , relay board for chemical additon svs

Pollution Control Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector